The online purchase is temporarily on hold, please contact +97144522207

PorceLock

AED 100.00

PorceLock is the perfect companion for porcelain and crown and bridge repair. PorceLock is a buffered 2.5% hydrofluoric acid gel that is both safe and effective for intraoral and extraoral use. Its formula contains 2.5% hydrofluoric acid.

402060. In Stock N/A .

PorceLock

PorceLock is the perfect companion for porcelain and crown and bridge repair. PorceLock is a buffered 2.5% hydrofluoric acid gel that is both safe and effective for intraoral and extraoral use. Its formula contains 2.5% hydrofluoric acid.

PorceLock creates bond strengths three to five times greater than treatments using silane alone. It achieves bond strengths approaching those of etched enamel after a 3-5 minute treatment. For repair of porcelain surfaces, the use of PorceLock and Cerinate Prime with Ultra-Bond allows you to achieve strong and reliable intraoral bonds. PorceLock’s gel viscosity and needle tip dispensing allows you to place the gel only where you want it.


The following documents are relevant to PorceLock and are available for download in PDF Format.
Instructions for PorceLock

Revitalize Supplemental Kit

 

You will need the Adobe Acrobat Reader to view these Files

The following documents are relevant to PorceLock and are available for download in PDF Format.
Porcelock Etchant

You will need the Adobe Acrobat Reader to view these Files

Buffered, safe porcelain etching.


porcelock-safe-porcelain-etching-zabadne-one

Sandblast (microetch) to roughen the porcelain surface.


porcelock-safe-porcelain-etching-zabadne-two

Apply Revitalize Porcelain Etchant (Kit No. 402060) to the porcelain surface for 2-3 minutes. Then rinse and dry.


porcelock-safe-porcelain-etching-zabadne-three

Apply Porcelain Conditioner to the porcelain surface for 30 seconds, then rinse and dry. Apply Cerinate Prime (Kit No. 1399) and gently air dry.


porcelock-safe-porcelain-etching-zabadne-four

Mix together equal portions of Tenure A and B and apply 3-5 coats.


porcelock-safe-porcelain-etching-zabadne-five

Apply Revitalize Resin Cement inside LUMINEERS and place LUMINEERS on the tooth surface.


porcelock-safe-porcelain-etching-zabadne-six

Light cure for 1-2 seconds using the Ceri-Taper 2 mm or 4 mm tacking tip and the Sapphire Plasma Arc Curing Light. Remove excess Revitalize Resin Cement from the margins by using a soft brush coated with Tenure S. Using a 9 mm tip and the Sapphire PAC Light, completely cure all LUMINEERS, exposing each surface for 5 seconds.


porcelock-safe-porcelain-etching-zabadne-seven

Finishing – Adjust the occlusion and perform a routine finish on the margins.

Tenure MPB System

Product # Item  
402060 PORCELOCK SYRINGE KIT (3 syringes)
Product # Item  
402060 PORCELOCK SYRINGE KIT (3 syringes)

Each Kit Contains:

  • PORCELOCK SOL SYRINGE 1.75mL
  • SYRINGE TIP PINK 18G/30* 10pc
  • RULE OF 55 CHART
  • INSTRUCTIONS
  • PORCELOCK SOL SYRINGE 1.75mL
  • SYRINGE TIP PINK 18G/30* 10pc
  • RULE OF 55 CHART
  • INSTRUCTIONS

Questions & Answers

What is the primary use of Porcelock?

PorceLock is a porcelain etchant. PorceLock is a buffered 2.5% hydrofluoric acid gel that is safe and effective for intraoral and extraoral use. It is the perfect companion for porcelain crown and bridge repair.

How effective is PorceLock?

Using PorceLock creates bond strengths three to five times greater than treatments using silane alone. It achieves bond strengths approaching those of etched enamel after a 3-5 minute treatment.

My lab work comes back pre-etched from the Cerinate Smile Design Studios. Why would I need Porcelock?

PorceLock is needed in any porcelain repair procedure, and also would be used in re-seating a unit that has de-bonded. PorceLock is also required when bonding porcelain-to-porcelain.

What people say!

“I always use PorceLock when bonding to porcelain, I find it gets me the best bond strength possible.”